International Coatings
IC 900 Catalyst - 2oz
IC-900-2OZ
$15.75$0.00
In stock – 7 available
Sign in to buy
New to SPSI? Open an account
Will-call pickup
-
Maple Grove, MN Corporate Headquarters7 in stock
Usually ready in 24 hours
Ships same day from MN & TX · Free shipping on supply orders $300+
IC-900
Overview
The catalyst helps the ink adhere better to hard-to-print fabrics such as nylon.
The 900 Series Nylon Ink must be mixed with the 900 Catalyst before printing on Nylon. Catalyst is available in 2 ounce, 8 ounce, and 1 gallon containers and must be purchased separately.
However, there are also other uses such as adding catalyst to our 3820 Flock Adhesive to promote better adhesion of the flocking fibers.
Usage Tips
▼
- The catalyst should be thoroughly mixed in to the ink to the following proportions:
- By volume = 16 parts ink to 1 part catalystBy weight = 20 parts ink to 1 part catalyst1 ounce of catalyst to 1 pint of ink2 ounces of catalyst to 1 quart of ink8 ounces of catalyst to 1 gallon of ink
- Ink may be used immediately after mixing. Do not mix more ink than is needed for a job. Do not under-catalyze the ink. Pot life of mixed ink is 4 to 8 hours. Over-catalyzation will shorten the pot life.
- If printing on cotton, it is not necessary to catalyze the ink. Print it as you would a normal direct print plastisol ink. SDS Refer to SDS prior to use.
Data Sheets
▼
